Format a USB flash drive. Start your Mac from macOS. Plug the USB flash drive into your Mac. Open Disk Utility, which is in the Utilities folder of your Applications folder. Choose View Show All Devices from the menu bar. From the sidebar in Disk Utility, select your USB flash drive. Boot Camp lets you install Windows on a Mac computer in its own partition, so you can use either Windows or Mac OS X on your Mac computer. How to install Windows 10 on a Mac using Boot Camp Assistant 9to5Mac. Installing Windows on a Mac, Download Boot Camp Drivers Without Boot Camp Assistant. Update you can only install Windows on a MacBook. Despite, all of that, you could quickly fix the drivers by following the steps below: Boot into the Windows OS from your Mac and insert the Mac OS installation disk; Open the disk's folder and locate the Boot Camp folder; Double-click on 'setup.exe' and click on 'Repair' to initiate the process of repairing; Once the repair is done, restart.

Installing Windows on a Mac should be a piece of cake with Bootcamp, but thatrarely is the case. In fact, I would personally say that Boot Camp Assistantis one of the worst apps that comes with OS X and unlike the rest, it doesn’twork seamlessly.

A few of its drawbacks:

• It only supports a drive with a single partition.
• It often throws very obscure error messages with limited detail.
• It re-downloads 1.6 GB Windows drivers every single time it runs. These areplaced under /Library/Application Support/BootCamp/WindowsSupport.dmg anddeleted and re-downloaded each time Boot Camp Assistant starts processing.

This post did take a lot of work to complie and I did bone my hard drive afew times while trying certain ideas, so please throw out a thanks if ithelped you out :)

Disclaimer: This guide below contains procedures which can potentiallydestroy your partitions and data. I accept no responsibility for such loss soplease proceed at your own risk.

Update (2016-07-20): I have updated this post with further improvementsrelating to downloading of Boot Camp drivers and ensuring that a Hybrid MBR isnot used (which would cause issues when installing Windows).

What You Will Need

• An 8 GB or larger USB stick
• A copy of the Windows 10 ISO
• A valid Windows 10 license
• A downloaded copy of unetbootin

Downloading Boot Camp Drivers

1. Start Boot Camp Assistant
2. Select Action / Download Windows Support Software
3. Choose your Downloads directory, enter your password and then clickSave

This will be the only step that we will use Boot Camp Assistant for.

Creating a Bootable USB Windows 10 Installer

Formatting Your USB Stick

Attach your USB stick and start Disk Utility, select your USB drive in theleft panel under External, click Erase and set the options as follows(exactly) and click Erase:

Name: FAT32
Format: MS-DOS (FAT)
Scheme: Master Boot Record

Turning Your USB Stick into a Windows Installer

Open unetbootin, enter your password, set the options as follows andclick OK:

Diskimage: checked, set to ISO and browse to your Windows 10 ISO
Type: USB Drive
Drive: Your USB drive (you should only see one entry here)

If you see more than one drive listed, you may confirm which is your USB driveby opening the Terminal and typing:

You’ll see your USB drive in the output and it should look something like this:

Once you have kicked off unetbootin, grab a snack while the Windows ISO iscopied to the USB stick. This process takes around 15 minutes to complete.

Finishing Up

Mini 2010 Os X Boot Camp Windows Drivers Updates

When this has completed, you may right click on the USB stick in Finder,select Rename “FAT32” and rename it as you like (I’ll call mine“WINDOWS 10”).

Finally, copy the WindowsSupport in your Downloads directory tothe Windows 10 USB stick so it’s easy to get to after our installation.

Partitioning Your Drive

In Disk Utility, select your internal hard drive on the left panel, andclick on Partition.

Click the + button and create a new partition of your desired size for yourWindows installation and name it as you wish (I’ll call mine “BOOTCAMP”). Ensure that the Format is set to MS-DOS (FAT) and click on Apply.

Ensuring that a Hybrid MBR is not used

Huge thanks to Rod’s post from the superuser post titledWindows detects GPT disk as MBR in EFI boot.

Once you add a FAT32 partition with either Boot Camp Assistant or Disk Utility,your disk is converted into a hybrid GPT / MBR disk which is actually notsupported by newer versions of Windows. In this step, we revert thisadditional change made by Disk Utility by switching back to a pure GPTpartition table.

1. Dowload the latest version ofGPT fdiskby browsing to the version, then gdisk-binaries and clicking the filewith the *.pkg extension (e.g. gdisk-1.0.1.pkg).

2. Install GPT fdisk by running the installer you downloaded

3. Open a Terminal and check the state of your MBR

   If your MBR partition is set to hybrid, please continue with step 4,otherwise if it is set to protective, you may skip the rest of thissection. Simply type q and hit return to exit GPT fdisk.

4. Type p to view the existing partition table and verify you’re workingon the correct disk

5. Type x to enter the expert menu

6. Type n to create a fresh protective MBR

7. Type w to save your changes and confirm the change when asked

8. Type q to exit GPT fdisk

9. Run GPT fdisk to show your disk layout:

   Your partition table should look something like this:

Installing Windows

Mini 2010 Os X Boot Camp Windows Drivers Free

Disconnecting All Devices From USB Ports

This step is critical as I have had rather serious problems during Windowsinstallation when certain external drives are connected.

Unplug everything from your Mac except your keyboard (if wired) and yourbootable Windows USB stick (which we prepared earlier).

If your Mac contains multiple physical drives, you will need to disconnectall disks except the one which you intend to install Windows on or you mayencounter the following error:

Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation.

Booting From the USB Stick

Ensure that the USB stick containing the Windows installer is inserted andthen restart your Mac while holding down the option (alt) key.

You should now be presented with a list of bootable drives. Select the USBdrive (usually titled “EFI Boot”) to begin installing Windows.

Correcting Your Windows Hard Disk Partition

When you are asked Where do you want to install Windows?, select theWindows partition created earlier (which I called “BOOTCAMP”) and clickDelete.

Next, select the chunk of Unallocated Space and click on New to createa proper Windows NTFS partition.

Note: OS X only supports creation of FAT filesystems, so this is why we needto re-create the partition ourselves during install.

Completing the Installation

Allow the installer to complete and boot into Windows.

Installing Boot Camp Support Software

Once Windows is up and running, install the Boot Camp Support software runningWindowsSupport/BootCamp/Setup.exe on your USB stick.

Note: The installer takes a little while to show up, so please be patient.

You may encounter a known issue whereby the Boot Camp Support Softwareinstaller locks up while installing Realtek audio.

If this occurs, you will need to open Task Manager and kill theRealtekSetup.exe process.

After the installer has completed, answer No when prompted to rebootand install the Realtek drivers manually by running%USERPROFILE%AppDataLocalTempRarSFX0BootCampDriversRealTekRealtekSetup.exe.If you can’t find this file, check any other directories starting withRARSFX under %USERPROFILE%AppDataLocalTemp.

Once complete, reboot Windows.

What You Will Need to Configure Windows

• The latest version of SharpKeys
• The flipflop-windows-sheel binary (see README for a download link)

Configuring Windows

Mapping Your Mac Keyboard

Install and run SharpKeys and then configure the following mappings tocorrect your Mac keyboard so that it behaves like a regular Windows keyboard:

Function: F13 -> Special: PrtSc
Special: Left Alt => Special: Left Windows
Special: Left Windows => Special: Left Alt
Special: Right Alt => Special: Right Windows
Special: Right Windows => Special: Right Alt

Mini 2010 Os X Boot Camp Windows Drivers

Note: for F13, you’ll need to select Press a key and click F13 on yourkeyboard.

Switching to Natural Scrolling

If you wish to flip scrolling direction to match that on OS X, runFlipWheel.exe and then click on Flip All.

Enabling Num Lock on Boot

Paste the following into a file named Enable NumLock on Boot.reg thenimport this into the registry to enable NumLock when Windows boots up(it doesn’t by default).

Completing Configuration

That’s it, give your machine one last reboot and you’ll have a fully workingWindows 10 installation.

Note: I have found Apple’s Magic Mouse to be extremely unreliable usingthe Boot Camp drivers from Apple. As such, I recommend purchasing a Logitech(or similar) mouse for use in Windows. I have no trouble plugging thewireless receiver for my Logitech mouse into one of the USB ports of my wiredApple Keyboard and it’s so tiny that you can’t see it at all.

Cleaning up a Windows Installation

Removing the Windows Partitions

If you decide to remove Windows, you may find that Disk Utility doesn’t allowyou to delete the two partitions that have been created by the Windowsinstaller.

This happens due to the fact that the first small partition created is of atype called Microsoft Reserved which OS X’s Disk Utility doesn’t support.

The safest way to delete these partitions is through the Windows installer. Sosimply boot from your USB stick as we did before and when you reach theWhere do you want to install Windows? question, you may delete your“BOOTCAMP” partition and the small 16 MB partition of type MSR (Reserved)just above the BOOTCAMP partition.

Once done, simply quit the installer by clicking the X in the top right cornerof each Window and reboot back into OS X.

Removing the Boot Entry

Even though we have removed the Windows partition, a boot entry will still bepresent when holding down option (alt) during boot.

You may remove these items by running the following in your Terminal:

Use Windows 10 on your Mac with Boot Camp

You can use Boot Camp to install Windows 10 on supported Mac models that have OS X Yosemite or later installed.

Features supported in Windows 10

The current version of Windows support software (drivers) available from Boot Camp Assistant includes support for the following features of your Mac in Windows 10:
- USB 3
- USB-C
- Thunderbolt
- Built-in SD or SDXC card slot
- Built-in or USB Apple SuperDrive

Your Apple keyboard, trackpad, and mouse

You can install Windows 10 on an internal drive in your Mac. Boot Camp Assistant helps you create a partition on your drive that's compatible with Windows. When you install Windows on a Mac that includes a Fusion Drive, the Windows partition is created on the mechanical hard drive part of the Fusion Drive (not the SSD). Microsoft BitLocker is not compatible with Boot Camp volumes.
After you install Windows, you can install the latest version of iTunes for Windows to listen to your music or play videos. You'll need to authorize iTunes in Windows to play music or videos you've purchased from the iTunes Store.
If some features aren't working when you start your Mac from Windows 10, try reinstalling Boot Camp support software using Boot Camp Assistant.

Mac computers that support Windows 10

The following Mac models support 64-bit versions of Windows 10 when installed using Boot Camp:

Mini 2010 Os X Boot Camp Windows Drivers Downloads

MacBook Pro

- MacBook Pro (15-inch, Late 2016)
- MacBook Pro (13-inch, Late 2016, Four Thunderbolt 3 Ports)
- MacBook Pro (13-inch, Late 2016, Two Thunderbolt 3 Ports)
- MacBook Pro (Retina, 15-inch, Mid 2015)
- MacBook Pro (Retina, 13-inch, Early 2015)
- MacBook Pro (Retina, 15-inch, Mid 2014)
- MacBook Pro (Retina, 13-inch, Mid 2014)
- MacBook Pro (Retina, 15-inch, Late 2013)
- MacBook Pro (Retina, 13-inch, Late 2013)
- MacBook Pro (Retina, 15-inch, Early 2013)
- MacBook Pro (Retina, 13-inch, Early 2013)
- MacBook Pro (Retina, 13-inch, Late 2012)
- MacBook Pro (Retina, Mid 2012)
- MacBook Pro (13-inch, Mid 2012)
- MacBook Pro (15-inch, Mid 2012)

MacBook Air

- MacBook Air (13-inch, Early 2015)
- MacBook Air (11-inch, Early 2015)
- MacBook Air (13-inch, Early 2014)
- MacBook Air (11-inch, Early 2014)
- MacBook Air (13-inch, Mid 2013)
- MacBook Air (11-inch, Mid 2013)
- MacBook Air (13-inch, Mid 2012)
- MacBook Air (11-inch, Mid 2012)

MacBook

- MacBook
- MacBook (Retina, 12-inch, Early 2016)
- MacBook (Retina, 12-inch, Early 2015)
- iMac
- iMac (Retina 5K, 27-inch, Late 2015)
- iMac (Retina 4K, 21.5-inch, Late 2015)
- iMac (21.5-inch, Late 2015)
- iMac (Retina 5k, 27-inch, Mid 2015)
- iMac (Retina 5K, 27-inch, Late 2014)
- iMac (21.5-inch, Mid 2014)
- iMac (27-inch, Late 2013)
- iMac (21.5-inch, Late 2013)
- iMac (27-inch, Late 2012)
- iMac (21.5-inch, Late 2012)
- Mac mini
- Mac mini (Late 2014)
- Mac mini Server (Late 2012)
- Mac mini (Late 2012)
- Mac Pro
- Mac Pro (Late 2013)

iMac

- MacBook
- MacBook (Retina, 12-inch, Early 2016)
- MacBook (Retina, 12-inch, Early 2015)
- iMac
- iMac (Retina 5K, 27-inch, Late 2015)
- iMac (Retina 4K, 21.5-inch, Late 2015)
- iMac (21.5-inch, Late 2015)
- iMac (Retina 5k, 27-inch, Mid 2015)
- iMac (Retina 5K, 27-inch, Late 2014)
- iMac (21.5-inch, Mid 2014)
- iMac (27-inch, Late 2013)
- iMac (21.5-inch, Late 2013)
- iMac (27-inch, Late 2012)
- iMac (21.5-inch, Late 2012)
- Mac mini
- Mac mini (Late 2014)
- Mac mini Server (Late 2012)
- Mac mini (Late 2012)
- Mac Pro
- Mac Pro (Late 2013)

Mac mini

- Mac mini (Late 2014)
- Mac mini Server (Late 2012)
- Mac mini (Late 2012)

Mac Pro

- Mac Pro (Late 2013)

System Requirements

You need support software (drivers) installed with Boot Camp to use Windows 10. This software is automatically downloaded when you use Boot Camp Assistant. Boot Camp supports 64-bit versions of Windows 10 when used with a supported Mac.

About General Drivers & Tools:

If you install this package, your device will be properly recognized by compatible systems, and might even benefit from new features or various bug fixes.
Please note that, even though other operating systems might also be compatible, we do not recommend you apply any software on platforms other than the specified ones. Doing so might cause the installation to crash, which could even render the device unusable.
When it comes to installing the package, the steps should not be much of a hassle because each manufacturer tries to make them as easy as possible; usually, you must make check for compatibility, get the package, run the available setup, and follow the instructions displayed on-screen.
However, due to the large number of devices out there and the various ways for applying these packages, it would be best if you refer to the installation manual first, to be sure of a successful update.
That being said, click the download button, and apply the present software on your product. Also constantly check with our website to stay up to speed with latest releases.

It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.